Filter by
AIT Solutions, Executive Director | Bangkok, Thailand
Dr. Naveed Anwar has been appointed the first CEO / Director of AIT Consulting. The appointment has been announced by the AIT President Prof. Said Irandoust. Dr. Naveed is currently serving as Director of the Asian Center for Engineering Computations and Software (ACECOMS) in the School of Engineering & Technology. AIT Consulting will be governed by a Board of Directors, operating with the advice of an Advisory Group, and run by a Chief Executive Officer (CEO) / Director. AIT Consulting’s vision is to “enhance the application of knowledge of science and technology for development”. It is supported by its mission statement of “increasing the spread of AIT knowledge of science and technology; establishing higher science, engineering, and technology standards in the market; developing and demonstrating innovative technology solutions; and collaborating with outside institutions for sharing…
Annual Conference, Session Chair (New York 2015)
AITS: Design of Tall Buildings Seminar
07–12 November 2016
21 September 2012
Application of Buckling Restrained Braces in a 50-Story Building
The use of Buckling Restrained Braces (BRB) for enhancing the performance of tall buildings is gaining wider acceptance. This presentation provides a detailed analysis of...
You must be a CTBUH Member to view this resource.
26 October 2015
Preliminary Design of Tall Buildings Using an Artificial Neural Network
Naveed Anwar & Thaung Htut Aung, AIT-Consulting; Lila Khatiwada, Asian Institute of Technology; Jose A. Sy, Sy^2 + Associates, Inc
With the rapid increase in the need for tall buildings to accommodate exponentially growing urban populations, quick and reliable estimations of approximate sizes of shear...
You must be a CTBUH Member to view this resource.
01 March 2014
Application of Buckling Restrained Braces in a 50-Storey Building
Jose A. Sy, Sy^2; Naveed Anwar, Thaung Htut Aung & Deepak Rayamajhi, Asian Institute of Technology
The use of Buckling Restrained Braces (BRB) for enhancing the performance of the buildings is gaining wider acceptance. This paper presents the first application of...
You must be a CTBUH Member to view this resource.
Filter by
Filter by
21 September 2012
Application of Buckling Restrained Braces in a 50-Story Building
The use of Buckling Restrained Braces (BRB) for enhancing the performance of tall buildings is gaining wider acceptance. This presentation provides a detailed analysis of...
26 October 2015
Preliminary Design of Tall Buildings Using an Artificial Neural Network
Naveed Anwar & Thaung Htut Aung, AIT-Consulting; Lila Khatiwada, Asian Institute of Technology; Jose A. Sy, Sy^2 + Associates, Inc
With the rapid increase in the need for tall buildings to accommodate exponentially growing urban populations, quick and reliable estimations of approximate sizes of shear...
01 March 2014
Application of Buckling Restrained Braces in a 50-Storey Building
Jose A. Sy, Sy^2; Naveed Anwar, Thaung Htut Aung & Deepak Rayamajhi, Asian Institute of Technology
The use of Buckling Restrained Braces (BRB) for enhancing the performance of the buildings is gaining wider acceptance. This paper presents the first application of...
19 September 2012
Application of Buckling Restrained Braces in a 50-Story Building
Jose Sy, SY2 + Associates, Inc; Naveed Anwar, Thaung Htut Aung & Deepak Rayamajhi, AIT-Consulting
The use of Buckling Restrained Braces (BRB) for enhancing the performance of tall buildings is gaining wider acceptance. This paper presents the first application of...
01 September 2012
Performance Based Seismic Design State of Practice, 2012 Manila, Philippines
Jose A. Sy, Sy^2 + Associates, Inc.; Naveed Anwar, Thaung HtutAung, and Deepak Rayamajhi, Asian Institute of Technology
The purpose of this paper is to present the state of practice being used in the Philippines for the performance-based seismic design of reinforced concrete...
20 October 2003
Progressive Analysis of Cross-Sections Exposed to Fire
Naveed Anwar & M. Talha Junaid, Asian Institute of Technology; Umer Haroon, Computers & Structures
The computational method presented in this paper reports the behavioral aspects of beam-column cross-sections under axial-flexural, exposed to high temperatures. A computer application of the...
Fields with an asterisk (*) next to them are required.
View our privacy policy